My Pro Street

Home My Pro Street Page 2

Popular FAQ

How To Test a 2JZGE MAF

The 2JZGE is an excellent platform for turbocharged performance, known as the NA-T. Most enthusiasts don't know that the non turbo 2JZ is quite...
Oil pressure switch location on K20 engine block near starter

Why Is My RSX Oil Pressure Light On?

The RSX oil pressure switch has a well-earned reputation for crying wolf. It fails, the light comes on, and the internet tells you to replace the switch and move on. That advice is correct roughly half the time — and engine-destroying the other half. Before ordering parts, spend twenty minutes confirming whether the K20 is lying to you or asking for help. The test is straightforward. The cost of skipping it is not.

Electronic Boost Controller Basics – How a EBC works

Blessing to some people, curse to others there's a lot of misinformation out there the electronic boost controller. The use of electronic solenoids allow you...

FAQ : How To Test Your Starter

There's nothing more annoying that trying to start your car and hearing the ever ominous "click" of your starter solenoid going out, not to...
Performance drivetrain gear-ratio calculation showing how engine RPM, transmission ratio, differential gearing and tire diameter determine vehicle speed.

How to Calculate Vehicle Speed by Gear Ratio, Tire Size and RPM

Choosing a transmission based only on horsepower capacity is one of the easiest ways to build a drivetrain that looks fantastic on...
2002–2003 Acura RSX K20 fuel pressure test showing the factory 47–52 PSI specification and fuel system components.

What Fuel Pressure Should a 2002–2003 Acura RSX Have?

The 2002–2003 Acura RSX factory fuel pressure specification is 47–52 PSI (320–370 kPa). Here’s how to test K20 fuel pressure and diagnose readings outside the factory range.

How to Shop for Connecting Rods

Building your performance engine can be a long and drawn out process, and connecting rods are arguably the single most important factor. If you...
Technician checks a modified street car on a chassis dynamometer inside a California emissions-testing shop.

California’s SB 1069 Gives Tested Aftermarket Parts a Faster Route to Market

California’s SB 1069 lets experienced manufacturers seek conditional approval for tested aftermarket parts while CARB finishes its EO review. It does not legalize every modification.