FAQs

Home FAQs

Popular FAQ

Factory LS1 press-fit piston pin compared with aftermarket full-floating wrist pin and retaining locks

LS1 Press-Fit vs. Full-Floating Wrist Pins: What’s the Difference?

Factory LS1 wrist pins use a press-fit connecting-rod arrangement, while many aftermarket combinations use full-floating pins and retaining locks. Learn how each design works and which measurements matter.

How To Test a 2JZGE MAF

The 2JZGE is an excellent platform for turbocharged performance, known as the NA-T. Most enthusiasts don't know that the non turbo 2JZ is quite...
Polestar electric performance car stopped at a United States border checkpoint with connected-vehicle software graphics

Why Polestar Can’t Sell New 2027 Models in America Under the Connected Vehicle Rule

Federal connected-vehicle rules prevent Polestar from selling new 2027 models in America, but existing cars and eligible older inventory remain legal.
Chase Briscoe and Christopher Bell race side by side toward the finish at Charlotte Motor Speedway.

Briscoe Beats Bell by 0.029 Second in Charlotte Photo Finish

Chase Briscoe edged Christopher Bell by 0.029 second at Charlotte after a final-corner clash. Tire struggles, traffic and racing-line choices shaped NASCAR’s closest Cup finish of 2026.

FAQ – Spark Plug Wires 101

Spark Plug Wires are some of the most common upgrades for most of our customers, and yet it's one of the components we receive...

DTC P0661 – How To Service Your IMRC

The Intake Manifold Runner Control (IMRC_ system found in the Honda / Acura K series engines has to do with the intake manifold and...

How To Reset the SRS Light in a Infiniti I35

The Safety Restraint System in your Infiniti I35 is designed to keep you and your passengers safe in the event of a collision. The...

Honda ECU Master List

Picking an ECU for a Honda engine swap starts with the complete part number, the donor vehicle and the actual hardware. “P28” or “P73”...