Pro Street About Us

Pro Street About Us

We were established in 1999 as a online community and low price warehouse that was located in Hayward, CA from 2002-2015. Our shop once held over 6 car bays and serviced most Mitsubishi/Honda needs in the mid 2000’s. Our DynoJet 44x has tuned over 2,000 customer vehicles.

We’ve built rally cars, show cars and cars that have made magazines. We’ve built our own parts, from Honda / Acura flywheels and clutches to Mitsubishi Evolution cam gears and cams.

While we definitely don’t know it all, we’ve been there and done that let’s say.

The heart of Pro Street Online is My Pro Street. Over 10,000 How To Guides and DIY articles are for informational and educational purposes only. Any injury or damage caused by our guides and tech tips are your responsibility.

If you are not comfortable working on your own car, take it to a mechanic.

Today, Pro Street Online has several outlets where you can reach us – Pro Street TV and our primary website where we compare and provide you with the absolute best prices online for your aftermarket parts.

Want to showcase your car? email john@prostreetonline.com for more information!!

 

 

 

 

16 COMMENTS

  1. Hello
    Im looking for the parts number on the msd box an the coils for a 997 Toyota cammry LE .
    Can you help me on that ?
    AN do you have a programmer to set up the EMC this car ?

    thank you
    charly

    • Hi Charly, sorry but what did you mean about the part number on the msd box?

      Is your LE a 4 or 6 cylinder? And yes we’ve got a programmer for your Toyota, it’s the Super AFC NEO, found here :

  2. hello guys , i’m havin a problem with my DTC on a bmw 320d 2005 , the sensor from the right wheel in front need to be changed , any idea which one on them might be ?

  3. Hey guys i have a question, I just bought 240sx s13, and im thinking of puttin LS1 engine in it. I read the guide that you have here, and was wondering if you guys have shop or you guys do LS1 swaps? I live in LA, CA so If you guys have a shop where you can do swaps , id like to know your information. like phone number to contact or anything in that sort. Thanks in advance

  4. Hi,

    Im looking for some info on the GM 25008302 MAF. I am trying to use it in my research project, without an ECU and on a stationary engine. I was wondering if you know what the supply voltage, and current it requires, the signal type, and how I would convert that signal into mass airflow. Finally, Im looking for the 3 pin pigtail, if you know what part number it is, I might be able to find one.

    I know this is a lot of information you might not have, but if you have any, we’d like to hear!

    Thanks!
    Cheers.

  5. Hi,
    Just wondering, will it work if I hook up AFC neo unit to a haltech sprint500.
    So that I can have last minute touch up for NY engine.

    • Hi Din, thanks for reading!

      yes the AFC NEO will work great with your Haltech, are you using speed density or a MAP driven system? It’s flexible, easy to use and would be great for quick touch ups to your tune as you need them.

      Thanks for commenting, let us know how your project turns out!

  7. Y’all know if anything from a 96 Acura 2.5 Tl can be used or swapped into a 94 Honda civic..? The Acura is a straight 5 which I never knew existed before seeing this car

    • Hi Donnie, sorry but that’s definitely a rare engine that’s not normally a Honda swap. There’s not much information on this swap but that doesn’t mean you can’t be the first! Sounds like an awesome project, let us know how it turns out!

  8. Hi my Ford Escape 2002 stereo is very bad so I decided to change it and I need help a friend try and cut the harness plug now am left with 21 loose wires I need to know where they go I manage to get a cheap stereo to try and had all the speakers on I need to know where the others wires go and how to hook up my amp to the speakers

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.