
The Mazda CX-9 stereo wiring diagram you need depends on model year, factory radio and whether the SUV has Bose. A first-generation non-Bose radio can drive door speakers directly. A Bose-equipped CX-9 routes speaker power through a separate amplifier. On second-generation Mazda Connect models, the screen, tuner and audio connections can be in different places.
This guide covers both U.S. CX-9 generations, from 2007 through 2023. Start with the fitment table, then use the radio or amplifier section that matches the connector in your vehicle.
- 2007–2015 CX-9 radio and Bose wiring
- 2016–2023 Mazda Connect and Bose wiring
- Stereo, speaker and subwoofer upgrades
- Troubleshooting and FAQs
| U.S. model years | What to identify first | Connector coverage in this guide |
|---|---|---|
| 2007–2008 | Touchscreen or non-touchscreen radio, Bose or standard audio | 2008 reported radio colors and early steering-wheel control pins |
| 2009–2012 | Radio face, navigation and Bose package | Early steering-wheel control pins where the documented connector matches |
| 2013–2015 | Radio/navigation configuration and Bose package | Steering-wheel control reference through 2014, plus 2015 non-Bose radio and Bose amp cavities |
| 2016–2020 | Mazda Connect touchscreen, tuner and factory amp | Vehicle-specific interface connections and aftermarket harness leads |
| 2021–2023 | Newer Mazda Connect platform, factory audio and camera equipment | 2021 interface connectors and leads, plus 2023 factory schematic identifiers. Later factory cavity assignments remain unverified |
First-generation Mazda CX-9 stereo wiring (2007–2015)
The original CX-9 was Mazda’s three-row crossover for buyers who wanted room for the family without giving up the feel of a car. The dash changed over its nine model years, so a radio that fits the opening in one CX-9 may need a different installation kit or interface in another. Compare the original radio face, navigation equipment and electrical connectors before ordering parts.
The biggest wiring difference is where the speakers get their power. On the 2015 standard system documented below, the four door-speaker pairs leave the dash radio. On the corresponding Bose system, the separate amplifier sits behind trim on the right side of the luggage compartment. If you’re keeping Bose, plan around that amplifier before buying a head unit or connecting speaker wires.
2008 CX-9 radio wire colors and 2015 non-Bose radio pinout
The 2008 column gives reported colors from an early radio wiring reference that does not specify the audio package. Use the colors as identification clues. The matching 2015 non-Bose cavities are independently documented. The 2015 column identifies cavities on factory radio connector 0920-201A for the non-Bose radio configuration. The matching speaker colors in these two references help identify the circuits, but verify the connector and circuit before using the chart on another year. A slash denotes a stripe on a single wire. Speaker pairs are listed positive first.
| Circuit | 2008 reported color | 2015 non-Bose cavity and color |
|---|---|---|
| Constant battery supply | Blue/red | 1B · Blue/red |
| Accessory supply | Pink/blue | No cavity listed here. Verify the switched feed on the exact radio configuration. |
| Ground | Black | 1W · Black |
| Illumination | Red/black | 1E · Red/black |
| Dimmer | White/blue | 1G · White/blue |
| Left front door (+ / −) | Blue/orange / violet | 1A Blue/orange · 1C Violet |
| Right front door (+ / −) | Gray/blue / yellow/green | 1D Gray/blue · 1F Yellow/green |
| Left rear door (+ / −) | Green / green-black | 1S Green · 1U Green/black |
| Right rear door (+ / −) | Yellow/black / yellow | 1V Yellow/black · 1X Yellow |
Test battery and accessory feeds with a digital multimeter. Battery voltage should remain with the ignition off. A conventional accessory feed should change with the key or power mode. The dimmer and illumination circuits belong to the lighting system. Keep each speaker’s negative lead paired with its positive lead and isolated from chassis ground.
2007–2014 steering-wheel audio control reference
| Signal | Where to look | Cavity | Factory color |
|---|---|---|---|
| Steering-wheel control circuit 1 | 24-pin connector behind the radio | 1N | Gray/black |
| Steering-wheel control feed | Same 24-pin radio connector | 1P | White/red |
| Steering-wheel control circuit 2 | 28-pin Bluetooth-module connector above the passenger kick panel, where equipped | 6 | Light green/red |
The steering-wheel control circuits go to a compatible interface. Match the connector by its keyed shape and pin orientation before counting cavities. Follow the interface configuration for the original radio and Bluetooth equipment.
2014–2015 CX-9 Bose amp location and 2015 connector reference
The 2014 and 2015 Bose references place the amplifier on the right side of the luggage compartment. The cavity details below are from the 2015 Bose radio schematic. Use the connector ID at the amplifier, because wires of similar colors appear in multiple circuits.
| Factory connector | Cavity and color | Function or use |
|---|---|---|
| 0920-303C | 3O Red/yellow · 3P Blue/yellow | Vehicle data pair. Leave it intact during an audio tap. |
| 0920-303C | 3K Gray/blue · 3M Yellow/green | Right-front speaker circuit pair. Listed by cavity order. |
| 0920-303C | 3L Blue/orange · 3N Violet | Left-front speaker circuit pair. Listed by cavity order. |
For a silent 2015 Bose system, check the 25A BOSE fuse in the main fuse block on the left side of the engine compartment. The 2015 diagram shows a constant battery feed on that circuit. Check voltage at both fuse test points before moving to the amp connector.
When adding a processor or amp, verify channel, polarity and signal range on the actual output before connecting. A factory Bose channel can be filtered for a specific driver. The front-door signal may lack the low bass you want for a subwoofer. Use a test signal and verify output at several volume settings before choosing the input to your aftermarket equipment.
Second-generation Mazda CX-9 stereo wiring (2016–2023)
Mazda redesigned the CX-9 for 2016, switching from the first generation’s V6 to a turbocharged four-cylinder and moving to Mazda Connect. The infotainment screen became just one part of the system. If your job is adding bass or replacing door speakers, you may get to the signal you need without taking the display out.
Mazda introduced a 10.25-inch display with its newer Mazda Connect interface for 2021. The second-generation lineup also offered a 12-speaker Bose system, including on the 2021 Touring with the Touring Premium Package. Check the build equipment and hardware on your SUV before choosing a harness. A second-generation CX-9 with Bose and a second-generation CX-9 with standard audio can call for different connections even when their dashboards look alike.
2016–2021 Mazda Connect radio connections
| Connection | Where the documented touchscreen interface connects | What it does |
|---|---|---|
| CMU and display area | Behind or below the radio display. Match both 18-pin and 28-pin connectors. | Connects the interface to the Mazda Connect hardware and supported vehicle features |
| Tuner | Passenger kick-panel area. The 2016–2020 instructions specify a white 20-pin or red 24-pin adapter. The 2021 instructions specify the white 20-pin adapter. | Provides the interface connection shown for the applicable tuner harness |
| With factory amp | Amp-equipped branch of the interface harness | Uses the adapter’s RCA branch. White is left front, gray is right front, green is left rear and purple is right rear. |
| Without factory amp | Non-amplified branch of the interface harness | Routes the four speaker channels through the applicable non-amplified connection |
| Antenna and camera | Separate adapter leads where equipped | Retains the supported antenna and camera functions when matched to the vehicle |
CMU stands for connectivity master unit. The Maestro RR/RR2 and HRR-MA2 instructions cover 2016–2020 and 2021 in separate touchscreen applications. The non-amplified system uses the main harness’s 8-pin extension connection. The amplified system uses the RCA branch’s 8-pin connection. The blue power-antenna lead connects to the amplified antenna adapter where required. Confirm your package before plugging in the branch. Also check whether the selected interface retains the steering-wheel controls, reverse camera, parking or 360-degree view equipment and factory USB features you use.
Radio harness colors for the documented 2016–2021 interfaces
These wire colors are on the aftermarket side of the interface. Use the function labels supplied with your radio and adapter when making the connections. Mazda factory leads use their own color and cavity assignments.
| Function | Aftermarket interface lead |
|---|---|
| Battery 12V | Yellow |
| Accessory 12V | Red |
| Ground | Black |
| Amplifier turn-on | Blue/white |
| Illumination (+) | Orange |
| Reverse input trigger (+) | Purple/white. Connect only to the aftermarket radio’s reverse input. |
| Parking brake signal (−) | Light green |
| Vehicle speed signal | Pink |
| Left front speaker (+ / −) | White / white-black |
| Right front speaker (+ / −) | Gray / gray-black |
| Left rear speaker (+ / −) | Green / green-black |
| Right rear speaker (+ / −) | Purple / purple-black |
2022–2023 Mazda Connect and Bose wiring
Match any interface to the 2022–2023 hardware by model year, package, connector and supported features. The 2021 installation sheet confirms a remote tuner connection for that application only. Mazda also identifies a separate remote tuner on affected 2023 CX-9s. For a speaker replacement, start at the driver you’re changing. For an amp or subwoofer, identify the factory amplifier and verify the signal on the output you plan to use. Factory radio and Bose amp cavity assignments for the later configurations remain unverified here.
2023 CX-9 factory audio schematic identifiers
These identifiers refer to the audio schematic sections in the 2023 AWD service index. Identify the installed Mazda Connect type and audio package before selecting a diagram.
| Factory audio package | Mazda Connect Type A | Mazda Connect Type B |
|---|---|---|
| Standard audio | 0920-2A | 0920-5A |
| Bose audio | 0920-3A | 0920-6A |
Before buying a replacement speaker, confirm its mounting pattern, depth with the window down, connector and impedance. Check the factory speaker label or part number with the speaker disconnected. A resistance reading can help identify a mismatched driver, but DC resistance and rated impedance are different measurements.
Mazda CX-9 stereo, speaker and subwoofer upgrades
- Replacing the radio and keeping Bose. Match an amp-retention interface to the year, radio style and Bose package. Before closing the dash, test the camera, steering-wheel controls, balance, fade and radio reception.
- Replacing door speakers. Check front and rear fit separately. Verify adapter bracket depth, plug fit and speaker impedance. If you keep the factory amp, check whether the chosen speaker receives a filtered signal.
- Adding a subwoofer. Keep the factory radio and use a compatible signal interface or processor. Find a channel with usable low bass, check it at several volume levels and size the amplifier to the actual subwoofer load. Run a dedicated fused power feed for the amplifier.
- Bypassing Bose. Map the speakers at the amp output, confirm each speaker’s load, and plan appropriate crossovers before moving them to aftermarket channels. Preserve the data wiring and confirm which factory functions depend on the original system.
For an aftermarket multi-channel system, compare the AudioControl EPICSIX six-channel amplifier and the BOSS Audio R1004 four-channel amplifier. Choose by RMS output at your speakers’ impedance, crossover requirements and available installation space. Both are universal amplifiers and require an installation matched to your CX-9.
If you’ve verified a 6.5-inch mounting position and a 4-ohm load for your installation, compare the Kenwood KFC-1666R coaxial speakers. Use our speaker RMS power and impedance guide to match them to an amplifier. Check the mounting depth and connector before buying.
Mazda CX-9 stereo wiring FAQs
Why does my aftermarket CX-9 radio turn on but have no sound?
On a Bose CX-9, first check the factory amp retention interface, amp fuses and whether the amp wakes when the radio turns on. If one speaker is silent, check balance and fade before tracing its individual channel. For more steps, see Aftermarket Radio Turns On but No Sound.
Can I use a Mazda CX-5 wiring diagram for the CX-9?
Use a CX-9 diagram that matches your model year, connector and audio package. If you’re working on the smaller crossover, see our Mazda CX-5 stereo wiring diagram.
Do I need an aftermarket radio to add a subwoofer?
You can retain Mazda Connect and take a signal through a compatible interface or from a verified factory audio output. Use an input rated for the signal type and voltage, and listen for bass roll-off before setting the gain.
Where is the Bose amp in a 2015 Mazda CX-9?
Look behind the right-side cargo trim. Disconnect battery power using the vehicle service procedure before unplugging the amp, and identify the factory connectors before tracing a circuit.

















