If you’re looking for the Mazda CX-30 stereo wiring diagram, start by checking whether your car has Bose. The Mazda Connect screen is only one part of the system. Find the tuner or amplifier and identify the connector before you go looking for speaker wires.
This guide covers U.S. 2020–2026 CX-30 audio equipment and shows how to find the right signal for your project. If you’re working on the larger Mazda crossover, see our Mazda CX-5 stereo wiring diagram.
First-generation Mazda CX-30 stereo wiring (2020–2026)
The CX-30 arrived in the U.S. for 2020. Its audio layout can put different drivers in the cowl, doors and dash. If you’re planning a Mazda CX-30 speaker upgrade, shop by location and the factory audio package. A cowl woofer and a front-door midrange have different jobs, even though they’re both up front.
Mazda lists an eight-speaker Mazda Harmonic Acoustics system and a 12-speaker Bose system for 2026. Bose availability varies by year and trim, so verify the equipment on your car before deciding whether to work at a speaker, the tuner or the separate amplifier. The wiring tables below come from first-generation schematics cataloged through 2024. Check the exact diagram before using them on a later car.
Standard Mazda CX-30 audio wiring
The first-generation non-Bose schematic shows an audio amplifier under the front passenger seat. These colors are at the amplifier or at the identified speaker connector, as labeled. Match the diagram and connector designation to your car before probing.
| Circuit | Amplifier connector and cavity | Wire color at amplifier | Wire color at speaker |
|---|---|---|---|
| Battery feed | 0920-201A, 1A | Red | — |
| Ground | 0920-201A, 1T | Black | — |
| Right front door | 0920-201B, 2M / 2O | Brown / yellow | Violet at A / pink at B |
| Right rear door | 0920-201B, 2J / 2L | White / tan | White at A / green at B |
The speaker rows follow cavity order. Verify polarity against the diagram for the exact car. The wire can change color through the door connector, so use the column for the end you’re working on. The white 20-pin tuner wire pairs from early installation notes still need an exact CX-30 application and channel match.
Mazda CX-30 Bose amp wiring
The first-generation Bose schematic locates the amplifier under the front passenger seat. On vehicles equipped with a cargo-area woofer, look under the cargo floor at the spare-tire well. The table gives colors at the amplifier. Speaker rows are in cavity order and require a polarity check before connecting an adapter.
| Circuit | Bose amplifier connector and cavity | Wire color at amplifier |
|---|---|---|
| Battery feed | 0920-115A, 1A | Red |
| Ground | 0920-115A, 1B | Black |
| Left front full-range | 0920-115A, 1C / 1D | Gray / brown |
| Right front full-range | 0920-115A, 1E / 1F | Light green / light blue |
| Rear subwoofer output | 0920-115A, 1G / 1H | Gray / brown |
| Center speaker | 0920-115C, 3I / 3J | Pink / violet |
| Left front door output | 0920-115C, 3K / 3L | Pink / violet |
| Right front door output | 0920-115C, 3M / 3N | Light green / light blue |
Mazda service documentation also identifies the MOST connection at the Bose amplifier. Work from a documented speaker output if your interface takes speaker-level audio. Check that the channel carries the range your new equipment needs, since a tweeter or midrange feed can filter out the low notes you want for a subwoofer.
Before buying speakers or tapping a signal
- Record the model year, trim, Bose status and the part number of the module you’re working on.
- Match the plug shape and cavity numbers to the service diagram. See how to read car stereo connector pin numbers if you’re comparing the terminal face to the wire side.
- Verify replacement speaker fit and impedance at the location you’re upgrading.
- For an amp or powered sub, verify the channel and signal range before connecting a compatible high-level input or line-output converter. If you’re comparing compact powered subs, Pro Street Online carries the Rockville RW10CA and the Pyle 10-inch low-profile powered subwoofer. Check mounting clearance and input compatibility for your CX-30.
Do standard and Bose CX-30 models use the same wiring?
The systems have different equipment and speaker circuits. Match the vehicle’s audio package and connector before selecting a harness or using a pinout.
Where is the Mazda CX-30 Bose subwoofer?
On equipped vehicles, look under the cargo floor at the spare-tire well. Confirm the connector and factory circuit before using it as a signal source.
Coverage: The connector tables are limited to the circuits documented above. The later tuner and amplifier revisions, exact year and trim applicability, and the connector at the Bose subwoofer itself remain unverified.











