Before you order a radio harness for your Kia Soul, check the model year, factory screen, navigation and whether the car has a separate amplifier. Two Soul radios can fit the same dash opening and send audio in completely different ways. That’s how a straightforward stereo swap turns into a radio that lights up and plays absolutely nothing.
This guide covers all three U.S. gas-powered Kia Soul generations, from 2010 through the final 2025 model year. Start with your generation below, then match the connector and factory audio package before using a chart. For the Soul EV, use the EV-specific wiring diagram and parts lookup.
First-generation Kia Soul stereo wiring (2010–2013, AM)
The first U.S. Kia Soul arrived for 2010 with the boxy shape that stuck around for the next two generations. For a first-generation Kia Soul stereo replacement, split the job into 2010–2011 and 2012–2013. The dash kit and harness references change at the 2012 update, so shopping by body shape alone can get you the wrong parts.
Check whether the radio drives the speakers directly or feeds a separate factory amplifier. If you’re keeping the amplifier, choose an interface that supports its input type and turn-on requirements. For a speaker swap with the factory radio in place, verify the pair at the speaker connector itself.
| Model years | Dash kit example | Harness and audio package check |
|---|---|---|
| 2010–2011 | Metra 99-7337B | Metra lists the 70-7303 harness and 40-KI11 antenna adapter in the kit instructions. Verify exact factory audio fitment. |
| 2012–2013 | Metra 95-7349B | Metra lists the 70-7304 harness and separate interface options. Check the SPDIF interface requirements on amplified cars. |
The following factory speaker colors are reported in a first-generation reference. The source groups these years together and omits connector cavities. Compare the colors and polarity against your exact factory diagram before splicing.
| Speaker | Reported positive | Reported negative |
|---|---|---|
| Left front | White | Brown |
| Right front | Yellow | Black |
| Left rear | Red | Blue |
| Right rear | Red/orange | Blue |
Second-generation Kia Soul stereo wiring (2014–2019, PS)
The redesigned 2014 Kia Soul brought a different dash and several factory radio packages. If you’re looking for a 2014–2019 Kia Soul radio pinout, identify the original receiver by its label and plugs. Check navigation and the external amp before you order the dash kit or harness.
On a documented PS radio with an internal amp, connector A carries the four speaker pairs. The factory service information also shows an external-amp configuration that uses a digital SPDIF link at the head unit. If you’re keeping the factory amp, check whether your interface supports that digital audio path before connecting the aftermarket radio.
Factory head-unit connector pins
Use this table only if the service diagram for your radio matches the connector configuration. Pin labels refer to the factory radio plugs. The chart lists pin functions and polarity. Factory insulation colors for these specific connectors still need model-year confirmation.
| Function | Internal amp | Documented external-amp configuration |
|---|---|---|
| Constant battery feed | B12 | B12 |
| Accessory feed | B11 | B11 |
| Power ground | B24 | B24 |
| Illumination + / − | A8 / A17 | A8 / A17 |
| Steering-wheel audio signal / ground | B4 / B17 | B4 / B17 |
| Left front + / − | A2 / A11 | Trace at factory amp output |
| Right front + / − | A3 / A12 | Trace at factory amp output |
| Left rear + / − | A1 / A10 | Trace at factory amp output |
| Right rear + / − | A4 / A13 | Trace at factory amp output |
| Digital audio + / − / ground | — | A15 / A6 / A5 |
On the documented camera-equipped configuration, B6 carries camera video, B7 supplies camera power, B18 is video ground and B23 is camera power ground. Verify the factory camera voltage and use a compatible retention interface. For help identifying cavities, see how to read car stereo connector pin numbers.
Maestro HK1 adapter wire colors
These colors are on the aftermarket harness for the documented 2012–2016 Soul application without a factory amp, navigation or an 8-inch screen. Match the harness revision and receiver instructions.
| Function | HK1 adapter lead |
|---|---|
| Constant 12 V | Yellow |
| Accessory | Red |
| Ground | Black |
| Left front + / − | White / white with black stripe |
| Right front + / − | Gray / gray with black stripe |
| Left rear + / − | Green / green with black stripe |
| Right rear + / − | Purple / purple with black stripe |
Third-generation Kia Soul stereo wiring (2020–2025, SK3)
The SK3 Soul arrived for 2020 and ran through the final U.S. model year in 2025. For a 2020–2025 Kia Soul stereo upgrade, check whether the car has the standard system or Harman Kardon premium audio. Confirm the factory display and navigation equipment too. Kia lists Harman Kardon equipment for select 2025 configurations.
If you’re replacing the receiver on a supported non-amplified Soul, Metra lists the 99-7397B kit with camera and steering-wheel control retention. The kit requires sub-dash modifications, so verify the exact application before cutting. For a Harman Kardon car, verify amp-retention support or use the factory amplifier-output schematic for your specific system.
The colors below are reported for 2020–2023 door speaker circuits. Connector positions, exact trim applicability and 2024–2025 factory wire colors still need confirmation. Check the vehicle diagram and keep the Harman Kardon output wiring tied to its own schematic.
| Speaker | Reported positive | Reported negative |
|---|---|---|
| Left front | White | Black |
| Right front | Red | Green |
| Left rear | Yellow | Brown |
| Right rear | Orange | Gray |
Adding a subwoofer or troubleshooting a stereo swap
If you want more bass without replacing the factory screen, compare the Rockville RW10CA powered subwoofer and the Pyle 10-inch low-profile powered subwoofer. Check the mounting clearance and the input requirements before ordering, especially if you’re taking a signal from a factory amp. Verify that the channel carries the bass range you need.
A replacement radio that turns on with no sound is a good reason to check the amp and harness first. Confirm the interface matches the original audio package, then check each speaker with balance and fade. Before closing the dash, test the backup camera and steering-wheel audio controls.











