Before you order a radio harness for your Honda HR-V, check the model year, screen size and whether the factory unit has navigation. On some first-generation HR-Vs, the same 24-pin connector designation appears on radios with different speaker pin assignments. Match the radio and its connector diagram before moving a terminal or cutting a wire.
Start with the chart below to find the section for your model year. Then check the factory radio before choosing a harness, especially if you want to keep the backup camera or steering-wheel audio controls.
| U.S. model years | Start here |
|---|---|
| 2016–2018 | Identify the 5-inch Color Audio radio, 7-inch Display Audio radio or factory navigation unit. |
| 2019–2022 | Identify the exact radio. The later navigation unit relocates the right-side speaker outputs. |
| 2023–2025 | Identify the trim and touchscreen. LX and Sport have a 7-inch unit; EX-L has a 9-inch unit. |
| 2026–2027 | All three U.S. trims have a 9-inch screen. Check the trim and audio package before choosing parts. |
First-generation Honda HR-V stereo wiring (2016–2022)
The 2016–2022 Honda HR-V brought a 1.8-liter engine and a choice of front- or all-wheel drive to Honda’s small crossover lineup. We covered the launch-era builds in SEMA 2015: Reviewing the Honda HR-V, and Bisimoto’s build made our Best Modified Cars of the 2015 SEMA Show roundup.
For a first-generation Honda HR-V stereo install, identify whether you have the 5-inch Color Audio radio, the 7-inch Display Audio radio or factory navigation. Check the radio label and plugs before ordering a wiring harness. On the 2019–2021 factory navigation unit, Honda moved the right-front and right-rear speaker outputs even though the main connector still has 24 cavities.
Factory radio connector A (24-pin)
Start with the factory cavity numbers. A15 means cavity 15 on connector A. Speaker entries list positive first. The 2016–2018 column covers the documented 5-inch Color Audio, U.S.-market 7-inch Display Audio and navigation configurations for the listed circuits. The later column applies specifically to the 2019–2021 factory navigation unit.
| Factory circuit | 2016–2018 documented units | 2019–2021 navigation |
|---|---|---|
| Radio ground | A1 | A1 |
| Constant battery feed | A3 | A3 |
| Left front speaker + / − | A15 / A16 | A15 / A16 |
| Right front speaker + / − | A19 / A20 | A17 / A18 |
| Left rear speaker + / − | A5 / A6 | A5 / A6 |
| Right rear speaker + / − | A9 / A10 | A7 / A8 |
| Steering-wheel audio control signal | A22 | A9 |
| Steering-wheel audio control ground | A11 | A19 |
On the 2016–2017 navigation unit and 2016–2018 5-inch Color Audio radio, Honda identifies A24 as ACC. For the 2018 navigation unit Honda identifies A24 as a diode-fed ignition circuit. On the 2019–2021 navigation unit the diode-fed ignition circuit is A23, and A24 carries B-CAN low. Confirm the switched supply against the exact diagram or use the accessory output provided by a compatible interface.
Factory insulation colors are still unverified for these tables. Use the cavity number and circuit function. Match the exact connector diagram for 2019–2021 non-navigation and 2022 radios before applying any column above. For connector orientation, see how to read car stereo connector pin numbers.
Aftermarket speaker wire colors and harness leads
The chart below shows the radio side of the iDatalink Maestro HO2 harness for documented installations, including the 2016–2018 5-inch screen and 2016–2019 7-inch screen applications. Confirm the firmware, harness revision and fitment for your radio. These colors identify the adapter leads.
| Function | HO2 adapter color |
|---|---|
| Constant 12 V | Yellow |
| Accessory output | Red |
| Ground | Black |
| Illumination | Orange |
| Power antenna | Blue |
| Reverse trigger for compatible receiver | Purple/white |
| Left front + / − | White / white with black stripe |
| Right front + / − | Gray / gray with black stripe |
| Left rear + / − | Green / green with black stripe |
| Right rear + / − | Purple / purple with black stripe |
Keeping the factory camera and steering-wheel controls
Check camera retention separately from radio power and speaker fitment. If your HR-V has LaneWatch, confirm support for the passenger-side camera as well as the backup camera. Interface support varies by application and receiver. The reverse-trigger lead tells the new radio when to switch inputs. Camera power and video travel on separate circuits.
Second-generation Honda HR-V stereo wiring (2023–2027)
Honda redesigned the U.S. HR-V for 2023, and the touchscreen setup changed again during the generation. The 2023–2025 LX and Sport use a 7-inch screen, while the EX-L uses a 9-inch screen. For 2026–2027, all three trims have a 9-inch screen, but the LX, Sport and EX-L still have four, six and eight speakers, respectively.
For a 2023–2027 Honda HR-V audio upgrade, use the model year and trim alongside the radio part number when checking harness fitment. If you’re keeping the factory screen and adding a subwoofer, identify the speaker channels you plan to tap. If you’re replacing the radio, confirm that your interface can retain the backup camera and steering-wheel audio controls before you buy it.
| Trim | 2023–2025 screen | 2026–2027 screen | Factory speaker count |
|---|---|---|---|
| LX | 7-inch | 9-inch | 4 |
| Sport | 7-inch | 9-inch | 6 |
| EX-L | 9-inch | 9-inch | 8 |
The factory radio cavity numbers and insulation colors for 2023–2027 remain unverified here. Use the service diagram for the exact trim and radio part number before tapping a factory lead.
Before you put the dash back together
- Confirm the factory radio part number, screen size and navigation equipment.
- Match the connector and cavity numbers to the applicable chart.
- Match wires by function and keep each speaker pair together.
- Check left-right balance and front-rear fade, then test backup camera, LaneWatch where equipped, steering-wheel audio buttons and radio shutoff.
Why does my HR-V radio power on but have no sound?
Check the harness fitment and speaker pin positions against the factory radio you removed. On a 2019–2021 navigation unit, the right-side speaker cavities differ from those on the earlier 24-pin radio.
Can I match Honda speaker wires by color alone?
Use the factory connector and cavity first, then confirm the insulation color against the vehicle diagram. The white, gray, green and purple pairs in the adapter table apply to the adapter.










