Tag: LS1 engine build

LS1 camshaft end play should measure 0.001–0.012 inch. Learn how to check cam thrust clearance with a dial indicator and why aftermarket timing components can affect the measurement.

Learn which way the **LS1 connecting-rod chamfer should face**, why it must clear the crankshaft journal fillet, and how correct rod orientation helps prevent clearance problems during LS1 engine assembly.

LS1 piston-to-deck clearance is determined by **crankshaft stroke, connecting-rod length, piston compression distance, and block geometry**. Learn how these dimensions affect piston position at TDC and how to measure deck clearance during an LS1 build.

LS1 crankshaft end play should measure 0.0015–0.0078 inch. Learn where the No. 3 thrust bearing is located, how crankshaft end play is measured, and what to check during an LS1 engine build.