
This Scion xD stereo wiring guide covers all 2008–2014 U.S. models. Start by identifying the factory radio and checking for added amplifiers or wiring before buying a receiver, wiring harness or dash kit.
Use the adapter-side wire chart below to connect a replacement radio in a documented non-amplified configuration. For a 2014 xD with factory Display Audio, check separately which controls and media connections your new receiver can retain.
2008–2014 Scion xD stereo wiring and radio fitment
The xD ran for one U.S. generation, from 2008 through 2014. The five-door hatchback followed the xA and carried on an idea Toyota had been testing since Project Genesis. That earlier push used cars like the Celica, MR2 Spyder and Echo to bring younger buyers into Toyota showrooms. Scion grew out of that effort. The boxy xB, the tC coupe and the FR-S gave Scion some hits, but Toyota eventually folded the brand back into its main lineup. See our look at why Scion fizzled out for the fuller story.
For a Scion xD radio replacement, identify the actual head unit before ordering parts. Toyota made its 6.1-inch Display Audio touchscreen standard for 2014, with Bluetooth streaming and AUX/USB connectivity. A harness that provides power and speaker outputs can get a new radio playing, but retaining steering-wheel buttons or the factory USB port takes a separate compatibility check.
Scion xD radio harness and dash kit
Metra lists the 99-8230 dash kit for the 2008–2014 xD and the 70-1761 harness for non-amplified applications. Match the installed plugs and radio size to the kit instructions. Check mounting depth and rear cable clearance before clipping the dash back together. A single-DIN Bluetooth receiver at Pro Street Online is a format example. Confirm the radio’s depth, features and interface support for your install.
Non-amplified Scion xD stereo wiring colors
The chart identifies common aftermarket adapter-side leads for power and the four speaker channels. These colors describe the replacement harness. Check the printed function labels on your specific harness and receiver before connecting them.
| Circuit | Typical aftermarket lead color |
|---|---|
| Battery / switched accessory / ground | Yellow / red / black |
| Front left + / − | White / white-black |
| Front right + / − | Gray / gray-black |
| Rear left + / − | Green / green-black |
| Rear right + / − | Violet / violet-black |
2011–2014 Scion xD factory-side wire color reference
These colors are reported for the vehicle-side harness by a secondary wiring reference. The xD diagrams for 2011 and 2014 corroborate the circuit names, but the accessible diagram listings do not expose enough detail to verify these colors or map them to exact connector cavities. Confirm the terminal and circuit on the installed radio before making a connection. The adapter chart above uses a separate color convention.
| Circuit | Reported vehicle wire color |
|---|---|
| Constant 12 V | Blue |
| Accessory 12 V | Gray |
| Ground | White/black |
| Illumination | Green |
| Antenna amplifier feed | Black |
| Front left + / − | Pink / violet |
| Front right + / − | Gray / yellow |
| Rear left + / − | Black / yellow |
| Rear right + / − | Red / white |
Gray is listed for both accessory power and a front speaker lead. Black is listed for both the antenna feed and a rear speaker lead. Use the connector and circuit function to distinguish them. Keep each speaker negative on its own channel. If the factory plug has been cut, use a complete diagram for the exact head unit before splicing.
The 2008 diagram also identifies a separate antenna amplifier, four speaker output pairs and steering-wheel audio circuits SW1, SW2 and SWG. Exact cavity numbers and an independently checked, year-by-year vehicle wire color map remain unverified. See our car audio wiring diagram explainer for help reading the connector view and distinguishing factory wiring from adapter leads.
Steering-wheel controls, antenna and factory USB
iDatalink publishes a Maestro installation diagram for the 2008–2014 xD without a factory amplifier. Use the interface manufacturer’s vehicle and radio selector and confirm which buttons and inputs are supported. Check the antenna connection separately. For the 2014 Display Audio unit, also verify whether your new receiver and adapter can use the original USB or AUX connection before planning to keep either.
Scion xD door speaker and amplifier upgrades
Choose speakers by position and fitment. Compare the factory frame, plug, mounting depth, and electrical load. Check door-glass clearance with the window down. If the truck-sized amp you already own is going in this little hatchback, measure where it will mount and leave room for wiring and ventilation. For a separate four-channel system, compare options such as the Soundfy four-channel amplifier at Pro Street Online by input type and supported speaker load. The amp is an example for a custom installation.
Scion xD stereo wiring FAQ
Can I replace the 2014 Scion xD touchscreen?
Check the dash kit, receiver size, wiring harness and the retention interface as separate items. Pay particular attention to steering-wheel audio controls, factory USB and antenna connections.
Why does my aftermarket xD radio turn on but have no sound?
Check mute, balance and fade, then confirm the speaker leads and the vehicle-side plug are seated correctly. If the car has an added amplifier, verify its power, signal and turn-on connections. Follow our aftermarket radio no-sound checklist before buying another receiver.
Do I need to cut the Scion xD factory radio wires?
A compatible plug-in adapter lets you retain an intact factory connector. If the plug has already been removed, match the replacement pigtail and verify the factory circuits by function before restoring it.

















