Home Honda FAQ Honda Ridgeline Stereo Wiring Diagram: Radio Pinouts and Harness Guide

Honda Ridgeline Stereo Wiring Diagram: Radio Pinouts and Harness Guide

0
Blue Honda Ridgeline in a workshop with a stereo wiring harness connector in the foreground.
Find Honda Ridgeline radio pinouts and identify the wiring harness you need for your stereo installation.

This Honda Ridgeline stereo wiring diagram guide separates factory wire colors, radio connector terminals and aftermarket harness wiring. Start with your model year and original audio system. A 2006 radio connector, a later first-generation navigation unit and a second-generation Display Audio system do not use one interchangeable pinout.

The sections below cover both Ridgeline generations through 2026, with application limits beside each wiring table. Confirm the original radio part number, connector shape and installed equipment before making connections. Unsupported circuits are identified rather than assigned guessed colors.

Honda Ridgeline radio wiring by year

U.S. model yearsApplication checkCoverage
2006, 2007, 2008First generation; navigation, single-CD or six-CD radio2006 factory 20-pin terminal reference; 70-1721 harness application.
2009, 2010, 2011, 2012, 2013, 2014First generation; later radio connections70-1729 application and a specifically labeled 2012–2014 navigation connector reference.
2015, 2016No U.S. Ridgeline model yearsDo not order a Ridgeline harness using a calendar build or registration year alone.
2017, 2018, 2019, 2020Second generation; identify 5-inch base or 8-inch Display AudioSystem-specific planning and a limited 2017–2019 amplified Display Audio reference.
2021, 2022, 2023Second generation; identify original multimedia and amplifier equipmentUpgrade planning; complete factory connector charts remain unverified.
2024, 2025, 2026Second generation; updated 9-inch multimedia systemAudio-package identification; no carryover pinout assumed.

Read the chart heading: A terminal table for one documented configuration is not confirmation for every year in the surrounding generation. Terminal numbers below are reference identifiers, not instructions to count cavities from an unverified connector view.

First-generation Honda Ridgeline stereo wiring: 2006–2014

The original Ridgeline gives owners a practical route to modern phone connectivity while keeping a familiar dashboard. Before buying a receiver, identify navigation equipment and the original speaker and subwoofer arrangement. Replacing the radio and retaining every factory audio feature are separate tasks.

The wiring-harness change within this generation matters more than a general “fits first-generation Ridgeline” label. Metra’s installation documents distinguish the earlier 70-1721 connection from the later 70-1729. Navigation-equipped trucks also need the appropriate mounting kit; the correct trim panel does not automatically retain navigation, satellite audio, the original microphone or the subwoofer.

First-generation radio harness and installation parts

ApplicationDocumented part referenceSelection note
2006–2008 radio harnessMetra 70-1721Confirm original connector and audio equipment.
2009–2014 radio harnessMetra 70-1729Do not substitute the earlier connector based on generation alone.
2006–2014 without factory navigationMetra 95-7870-series double-DIN kitSelect matching dash finish and current application.
2006–2014 with factory navigationMetra 95-7884BNavigation-specific mounting solution, not a feature-retention interface.
First-generation antenna adapterMetra 40-HD10Listed in the installation instructions; verify the vehicle plug.

2006 factory radio connector A: 20-pin power and speaker reference

Honda’s 2006 service information identifies these circuits on audio connector A (20P). Use the correct connector drawing and original radio identification before applying the cavity numbers. This table is not extended automatically to 2007–2008 or later radios.

TerminalFactory wireFunction
A2Yellow/redAccessory supply
A3Green/redAudio remote switch
A5Red/blueRight rear speaker +
A6Brown/whiteLeft rear speaker +
A7BlueRight front speaker/tweeter +
A8Light greenLeft front speaker/tweeter +
A9Red/blackLights-on signal
A10WhiteConstant supply
A11BrownRemote-switch ground
A15YellowRight rear speaker −
A16Red/yellowLeft rear speaker −
A17RedRight front speaker/tweeter −
A18PurpleLeft front speaker/tweeter −
A19RedBrightness-controller circuit
A20BlackGround G404

For the documented 2006 non-navigation six-CD configuration, connector C (8P) identifies C4 yellow/black as subwoofer positive and C5 light-green/red as subwoofer negative. These are not general-purpose power connections.

2012–2014 navigation radio connector A: 24-pin reference

The navigation-equipped configuration in this service reference uses different cavity assignments from the early 20-pin connector. Its power and speaker colors can resemble the earlier truck while the terminal positions change. Confirm the exact connector view before using these references.

TerminalFactory wireFunction
A1RedBrightness-controller circuit
A5BrownRemote-switch ground
A6YellowRight rear audio −
A7Red/blueRight rear audio +
A10Red/yellowLeft rear audio −
A11Brown/whiteLeft rear audio +
A12BlackMain ground G404
A13Red/blackIllumination +
A14Yellow/redAccessory supply
A16Green/redAudio remote switch
A18RedRight front audio −
A19BlueRight front audio +
A22PurpleLeft front audio −
A23Light greenLeft front audio +
A24WhiteBattery supply

This table does not establish the non-navigation connector assignments or confirm all 2009–2011 radios. Data, security and navigation signal terminals are excluded from the installation chart.

First-generation speakers and factory subwoofer

The dash tweeters and front door speakers need to be considered together; research documents parallel front-channel wiring. Some trucks have an 8-inch subwoofer behind the rear seats. A receiver replacement alone does not establish retention of the original subwoofer or its amplification.

Check speaker mounting geometry, depth, window clearance and impedance before ordering. A nominal replacement size is not a guarantee of an unmodified installation. Keep tweeter filtering in place, and do not connect a tweeter directly to an unrestricted full-range output.

Second-generation Honda Ridgeline stereo wiring: 2017–2026

The second-generation Ridgeline adds more integration decisions to an audio upgrade. The original screen, amplifier package, camera functions and vehicle settings all affect the work. Treat the receiver, speakers, subwoofer and any truck-bed audio equipment as related parts of a system rather than assuming every plug carries ordinary speaker-level audio.

Within this generation, separate the early 5-inch base receiver from the 8-inch Display Audio system, then separate the 2024 multimedia update again. A shared body generation does not prove that the connector signals, camera connections or required interfaces stayed unchanged.

2017–2020: base radio versus Display Audio

Installation research distinguishes the early 5-inch base receiver from the more integrated 8-inch system. The base-radio installation has documented dash-kit and harness options. For the premium system, the sources reviewed do not establish a universal plug-and-play replacement path. Verify current interface support for the exact radio and trim.

Before replacing a receiver, make a retention checklist covering steering-wheel controls, USB, satellite radio, the factory microphone, camera views and any factory amplifier or subwoofer. A physical dash kit does not provide these electrical functions.

2017–2019 amplified Display Audio: limited connector A reference

The Honda service reference below is specifically the 24-pin connector A configuration with a stereo amplifier and CD player unit. The front-channel entries are preamp signals to the amplifier, not direct speaker outputs. It is not a wiring chart for the 5-inch radio.

TerminalHonda signal nameFunction
A1GNDAudio-unit ground
A3+B RADIOBattery supply
A11AUDIO REM GNDAudio/HFL switch ground
A15 / A16FL SP PRE+ / PRE−Left preamp audio pair
A19 / A20FR SP PRE+ / PRE−Right preamp audio pair
A21RADIO SW+BAudio-system switched output
A22AUDIO REMRemote-switch signal
A23AUDIO INFO SWRemote-switch signal
A24ACCAccessory supply

Wire colors, output-current ratings and a verified connector-face drawing are not established here. Do not load the switched output with accessories or treat preamp negative as chassis ground. Other amplifier/CD combinations require their own connector reference.

Active noise cancellation and aftermarket bass

Check active noise cancellation before adding amplification or a subwoofer. Installation research calls for disabling ANC when modifying the audio signal chain on these trucks. Unwanted low-frequency output can otherwise become part of the troubleshooting problem. Use the correct year-specific procedure; an unverified “cut this wire” shortcut is not supplied here.

2021–2023 upgrade coverage

The installation research reviewed advises against routine receiver replacement on 2021-up trucks. That is installation guidance, not a claim that every custom installation is impossible. Retaining the factory screen while upgrading speakers or adding a properly integrated amplifier may be the more practical project. Full 2021–2023 camera, amplifier and radio pinouts still require verification.

2024–2026 updated multimedia and audio packages

Honda introduced a 9-inch touchscreen across the 2024 lineup, and its 2026 specifications also identify the 9-inch system. The documented 2024 and 2026 audio packages are:

U.S. trimDocumented audio specificationInstallation implication
Sport, RTL, TrailSport215 watts; seven speakers including subwooferIdentify the original signal path and speaker loads.
Black Edition540 watts; eight speakers including subwooferDo not assume the lower-trim amplifier connections apply.

These package specifications do not establish connector compatibility across all three years. The 2024–2026 radio, amplifier, camera and USB cavity assignments are not confirmed in this guide. Do not use the earlier Display Audio terminal chart for the updated unit.

Aftermarket radio wire colors: keep them separate from Honda colors

The following are common aftermarket conventions, not a factory Ridgeline pinout. Follow the instructions supplied with the selected receiver and adapter; manufacturers can differ.

Aftermarket functionCommon color
Battery / accessory / groundYellow / red / black
Left front speaker + / −White / white-black
Right front speaker + / −Gray / gray-black
Left rear speaker + / −Green / green-black
Right rear speaker + / −Purple / purple-black

For example, white is a documented factory battery wire in the early Ridgeline reference, while white commonly identifies an aftermarket front-speaker lead. Matching colors across those two sides can create the wrong connection. Read our car audio wiring diagram guide before joining the harnesses.

Radio installation and troubleshooting checklist

  1. Record the original radio part number and photograph every plug before disconnecting it.
  2. Follow the vehicle service procedure for battery disconnection; have any required anti-theft information available.
  3. Match the harness by year, connector and audio package. Reconnect hazard and airbag-indicator connections before restoring power.
  4. Verify battery, accessory and ground with appropriate test equipment. Do not probe data or airbag circuits with an incandescent test light.
  5. Connect audio at the correct level. Keep speaker negatives separate from each other and from chassis ground.
  6. Test every speaker with balance and fader, then check the subwoofer, cameras, steering-wheel controls and retained inputs before reassembling the dash.

If the screen powers up but the speakers are silent, work through our aftermarket radio no-sound guide. For added amplification, use our amplifier wiring and noise guide. Browse Pro Street Online car electronics for upgrade ideas, checking compatibility separately.

Honda Ridgeline stereo wiring FAQ

Which radio harness fits a first-generation Ridgeline?

The manufacturer references reviewed distinguish the 70-1721 for 2006–2008 applications and the 70-1729 for 2009–2014. Verify the original connector and audio system before purchase; the harness alone does not guarantee retention of every factory feature.

Does one chart cover all 2006–2014 Ridgelines?

No. The documented early 20-pin and later 24-pin configurations have different terminal positions. Similar wire colors do not make the pinouts interchangeable.

Can I retain the factory subwoofer?

Only with a verified plan for its signal, amplification, impedance and filtering. Do not connect it to an arbitrary receiver wire or assume a basic four-speaker adapter retains it.

Can I use a Honda Pilot wiring chart?

Use related-vehicle information for comparison only. Confirm the Ridgeline’s original radio, connector and equipment before making any connection.

Is every Ridgeline factory wire verified here?

No. This guide provides limited, labeled terminal references and installation information. Camera supply voltage, complete amplifier outputs, later USB/data circuits and several year-specific connector views remain unverified.

For another Ridgeline maintenance task, see how to reset the Honda Ridgeline maintenance light.

LEAVE A REPLY

This site uses Akismet to reduce spam. Learn how your comment data is processed.