NEW BLOX PRODUCTS FOR HONDA S2000!!
BLOX is pleased to release it’s new line of Honda S2000 chassis and driveline components. Although each new component may look simple in design, all have a great impact on driveability and steering response.
Pro Street Online has been a BLOX dealer since their inception, and continue to support and sell their innovative products!
Take a look at the new offerings for AP1 and AP2, fresh from BLOX Racing!
BLOX RACING Half Shaft Spacers
The BLOX Racing half shaft spacer kit is specifically designed for lowered Honda S2000s. When the vehicle is lowered, the angle of the driveshaft is altered, causing play between the driveshaft roller and spider. This, in turn, causes and places stress at the CV joints and differential output shaft bearings, causing premature wear and in some cases damage.
The result is a prominent “clicking” or worse, rear-end vibrations. The BLOX Racing half shaft spacer kit helps alleviate the stress, and associated wear, at the CV joints, resulting in a smooth, trouble-free operation.
Recommended for cars lowered more than 1.5 inches.
BLOX RACING BUMPSTEER KITS
The BLOX Racing front bump steer kit is highly recommended for any lowered Honda S2000. When lowering a vehicle, the factory steering tie rod geometry becomes altered and causes wheel “tug”.
Bump steer is the term for the tendency of the wheel of a car to steer as it moves upwards or over bumps, hence it’s name.
A dangerous condition that can cause an accident if left unattended or driven by a novice, these BLOX bumpsteer kits eliminate and corrects bump steer. Installing the BLOX Racing front bump steer kit helps correct the geometry back to its ideal position.
Recommended for vehicles lowered 1” and more.
BLOX RACING Steering Rack Bushing Kit
BLOX Racing’s rigid bushing kit replaces the Honda S2000s factory’s soft, rubber mounts along the steering rack. The new billet AL6061 bushings are CNC-machined and directly increase the steering response and feedback, thus offering quicker and more precise turning.
The BLOX Racing steering rack rigid bushing kit is highly recommended for autocross and road racing.
BLOX Racing Differential Collars
Much like a subframe riser or subframe collar kit, these differential collar kits from BLOX are a perfect choice for your AP1 or AP2. The BLOX Racing differential collar kit for the Honda S2000 helps limit the amount of flex associated with the OEM rubber bushings under load and enthusiast driving.
These billet, CNC-machined collars easily installed on the differential mounts and provide better stability and power transfer through the drivetrain, while eliminating slop and any play in the mounts or differential.
BLOX RACING Engine Mount Ring
The BLOX Racing engine mount rings for the Honda S2000 help solidify the OEM mounts. By adding these billet CNC-machined mount rings, engine movement and flex are greatly reduced.
Ideal for autocross and road racing.
BLOX RACING Tunnel Brace
The BLOX Racing tunnel brace for the Honda S2000 reinforces the tunnel floor by replacing the OEM propeller shaft guard and eliminating flex and stiffening the chassis overall.
Don’t forget to visit our booth at BLOX Open House 2012!
Food, fun, cars and Pro Street, what more could you want??
Pro Street Online is a Division of Vic Hubbard Speed and Marine Corps.
Serving California since 1949.
