My Pro Street

B0098 Code Explained: Left Frontal Restraints Sensor Performance (Subfault)

OBD-II scanner displaying B0098 with the left front impact sensor highlighted behind the front bumper and the SRS warning light illuminated.

If your scan tool displays B0098, your vehicle’s Supplemental Restraint System (SRS) has detected that the Left Frontal Restraints Sensor is not operating within its expected performance parameters.

The left front impact sensor is typically mounted behind the front bumper, radiator support, or left frame rail. It measures collision forces and provides critical data to the Airbag Control Module (ACM) so it can determine whether the front airbags and seat belt pretensioners should deploy.

When the ACM determines the sensor is reporting implausible, intermittent, or out-of-range data, it stores B0098 and illuminates the Airbag Warning Light. Until the problem is corrected, portions of the SRS may be disabled.

If you’re researching additional SRS or Body diagnostic trouble codes, visit our Complete OBD-II Trouble Code Guide:

https://my.prostreetonline.com/dtc-obdii

Note: B0098 is a manufacturer-specific SRS code. While the exact wording varies by automaker, it is commonly defined as “Left Frontal Restraints Sensor Performance (Subfault).” Unlike resistance or open-circuit codes, a performance fault indicates the sensor is communicating but providing implausible or out-of-range data to the Airbag Control Module (ACM).

Quick Facts

ItemInformation
OBD-II CodeB0098
DescriptionLeft Frontal Restraints Sensor Performance (Subfault)
CategoryBody (B) Codes
SystemSupplemental Restraint System (SRS)
Severity★★★★★ Critical
Safe to Drive?Mechanically yes, safety-wise no
Common CausesFaulty impact sensor, intermittent wiring, collision damage, poor connector contact
Typical Repair Cost$150–900

What Does B0098 Mean?

The B0098 code indicates the Airbag Control Module (ACM) has determined that the Left Frontal Restraints Sensor is operating outside its expected performance range.

Unlike an electrical fault such as an open or short circuit, a performance code means the sensor is still communicating but its readings do not agree with what the ACM expects based on vehicle operating conditions and other crash sensors.

The monitored system generally includes:

Related articles:

Symptoms of B0098

Common symptoms include:

Common Causes

Faulty Left Front Impact Sensor

Internal electronic degradation may cause inaccurate or inconsistent sensor readings.

Intermittent Wiring

Damaged wiring can result in:

Collision Damage

Even relatively minor front-end impacts can affect:

Corroded Connector

Moisture intrusion may lead to:

Improper Previous Repairs

Body repairs may introduce:

Airbag Control Module Failure

Although uncommon, an internal ACM failure can incorrectly identify a sensor performance issue.

How Serious Is B0098?

Extremely serious.

If the ACM cannot rely on information from the left frontal impact sensor:

The SRS warning light should always be addressed immediately.

Can You Drive With B0098?

Mechanically, yes.

From a safety standpoint, no.

The vehicle will usually operate normally, but one or more airbags may be disabled until the fault has been repaired.

How to Diagnose B0098

1. Scan the SRS Module

Use a professional scan tool capable of reading manufacturer-specific Body (B) codes and SRS subfaults.

2. Inspect the Left Front Impact Sensor

Inspect the sensor for:

3. Inspect Wiring and Connectors

Check for:

4. Verify Sensor Operation

Using manufacturer-approved diagnostic procedures, verify:

Never use a powered test light or directly probe airbag circuits.

5. Inspect Previous Collision Repairs

Verify:

Common Repairs

RepairEstimated Cost
Repair sensor wiring$150–350
Replace SRS connector$100–250
Replace left front impact sensor$150–450
Replace front wiring harness$250–600
Replace Airbag Control Module$900–1,800

Common Diagnostic Mistakes

Many technicians replace the impact sensor before inspecting:

A performance code does not always indicate a failed sensor.

Vehicles Commonly Affected

B0098 may be found on vehicles from manufacturers including:

Sensor design and diagnostic procedures vary by manufacturer.

How to Prevent B0098

You can reduce the likelihood of B0098 by:

Frequently Asked Questions

What causes B0098?

Common causes include a failing left front impact sensor, intermittent wiring, corroded connectors, previous collision damage, improper repairs, or an Airbag Control Module fault.

Is B0098 dangerous?

Yes.

An unreliable frontal impact sensor may prevent the Supplemental Restraint System from deploying airbags correctly during a collision.

Can a minor accident trigger B0098?

Yes.

Even a relatively minor front-end impact can affect crash sensor calibration, mounting, or wiring.

Can I clear B0098 myself?

Yes.

However, unless the underlying fault has been repaired, the code will typically return during the next SRS self-test.

Will B0098 affect vehicle performance?

No.

The code only affects the Supplemental Restraint System and does not impact engine performance or drivability.

Final Thoughts

The B0098 code indicates the Left Frontal Restraints Sensor is operating outside the performance parameters expected by the Airbag Control Module. While the vehicle will generally remain drivable, inaccurate crash sensor data can prevent proper airbag deployment during a frontal collision.

Most repairs involve diagnosing the impact sensor, wiring harness, connectors, or correcting damage from previous collision repairs. Restoring proper SRS operation should be treated as a high priority to ensure maximum occupant protection.

For additional airbag diagnostics and Body code repair guides, browse our complete Body (B) OBD-II Code Library:

https://my.prostreetonline.com/category/how-to/dtc-obdii

Related Articles

Exit mobile version