If your scan tool displays B0095, your vehicle’s Supplemental Restraint System (SRS) has detected a fault involving the Right Frontal Restraints Sensor, also known as the right front impact sensor or crash sensor.
This sensor is mounted near the front of the vehicle—typically behind the front bumper, radiator support, or front frame rail—and works with the Airbag Control Module (ACM) to determine whether a frontal collision is severe enough to deploy the airbags and seat belt pretensioners.
When the ACM detects an electrical or communication fault with the right frontal impact sensor, it stores B0095 and illuminates the Airbag Warning Light. Depending on the manufacturer and the specific subfault, the SRS may disable one or more airbags until the problem is repaired.
If you’re researching additional SRS or Body diagnostic trouble codes, visit our Complete OBD-II Trouble Code Guide:
https://my.prostreetonline.com/dtc-obdii
Note: Unlike B0089–B0094, B0095 is a different type of SRS fault. The generic SAE definition is “Right Frontal Restraints Sensor (Subfault)”, referring to the right front impact/crash sensor rather than an airbag deployment loop. Manufacturers use subfaults to indicate the exact failure (such as open circuit, short to ground, or internal sensor failure)
Quick Facts
| Item | Information |
|---|---|
| OBD-II Code | B0095 |
| Description | Right Frontal Restraints Sensor (Subfault) |
| Category | Body (B) Codes |
| System | Supplemental Restraint System (SRS) |
| Severity | ★★★★★ Critical |
| Safe to Drive? | Mechanically yes, safety-wise no |
| Common Causes | Failed impact sensor, damaged wiring, corroded connector, collision damage |
| Typical Repair Cost | $150–900 |
What Does B0095 Mean?
The B0095 code indicates the Airbag Control Module (ACM) has detected a fault involving the Right Frontal Restraints Sensor.
Depending on the manufacturer, the sensor monitors:
- Frontal collision severity
- Impact acceleration
- Airbag deployment thresholds
- Pretensioner activation timing
Unlike deployment-loop codes that monitor airbag wiring resistance, B0095 specifically relates to the front impact sensor or its electrical circuit. The exact failure is identified through a manufacturer-specific subfault, which may indicate an open circuit, short to ground, short to voltage, or an internal sensor failure.
Related articles:
- B0040 Code Explained – Left Front Impact Sensor Circuit
- B0045 Code Explained – Right Front Impact Sensor Performance
- B0096 Code Explained – Left Frontal Restraints Sensor
Symptoms of B0095
Common symptoms include:
- Airbag Warning Light illuminated
- “Service Airbag” message
- “SRS Fault” warning
- Stored B0095 diagnostic code
- Passenger airbag may be disabled
- Additional SRS-related diagnostic codes
- No engine or transmission drivability problems
Common Causes
Failed Right Front Impact Sensor
Internal electronic failure is one of the most common causes of B0095.
Collision Damage
Even relatively minor front-end impacts can damage:
- Crash sensors
- Mounting brackets
- Wiring harnesses
Damaged Wiring
The wiring between the sensor and ACM may suffer:
- Broken conductors
- Pinched insulation
- Rodent damage
- Chafing
Corroded Connector
Moisture intrusion may lead to:
- Corrosion
- High resistance
- Poor electrical contact
- Intermittent sensor communication
Loose Electrical Connection
Improperly seated connectors after repairs are a common cause.
Airbag Control Module Failure
Although uncommon, an internal ACM fault can incorrectly report a sensor failure.
How Serious Is B0095?
Extremely serious.
If the ACM cannot accurately monitor the right frontal impact sensor:
- Airbag deployment may be delayed or prevented.
- Seat belt pretensioners may not activate properly.
- Passenger protection during a frontal collision is reduced.
The SRS warning light should never be ignored.
Can You Drive With B0095?
Mechanically, yes.
From a safety standpoint, no.
Most vehicles remain fully drivable, but the Supplemental Restraint System may disable one or more airbags until the fault is repaired.
How to Diagnose B0095
1. Scan the Airbag Module
Use a professional scan tool capable of reading manufacturer-specific SRS Body codes and associated subfaults.
2. Inspect the Right Front Impact Sensor
Locate the sensor near the:
- Radiator support
- Front frame rail
- Bumper reinforcement
Inspect for:
- Physical damage
- Loose mounting
- Water intrusion
- Bent brackets
3. Inspect Wiring and Connectors
Check for:
- Broken wires
- Corrosion
- Loose connectors
- Pinched harnesses
4. Verify Sensor Power and Communication
Using the manufacturer’s diagnostic procedures, verify that the sensor receives proper power, ground, and communication signals.
Never use a powered test light on SRS circuits or probe airbag connectors directly.
5. Inspect for Previous Collision Repairs
Improper repairs may leave:
- Incorrect replacement sensors
- Damaged wiring
- Missing brackets
- Poor connector engagement
Common Repairs
| Repair | Estimated Cost |
|---|---|
| Repair sensor wiring | $150–350 |
| Replace connector | $100–250 |
| Replace right front impact sensor | $150–450 |
| Replace front wiring harness | $250–600 |
| Replace Airbag Control Module | $900–1,800 |
Common Diagnostic Mistakes
Many technicians replace the crash sensor immediately without checking the wiring or connector.
Common overlooked problems include:
- Corroded connectors
- Harness damage after minor collisions
- Loose connectors after bumper repairs
- Water intrusion into the sensor
Always inspect the complete circuit before replacing the sensor.
Vehicles Commonly Affected
B0095 may appear on vehicles from many manufacturers, including:
- Chevrolet Silverado
- GMC Sierra
- Ford F-150
- Ford Escape
- Honda Civic
- Honda Accord
- Toyota Camry
- Toyota Tacoma
- Nissan Altima
- Hyundai Tucson
- Kia Sportage
- Subaru Outback
- Jeep Grand Cherokee
- Dodge Ram
- Mazda CX-5
The sensor location and diagnostic procedure vary by manufacturer.
How to Prevent B0095
Although not every failure can be prevented, you can reduce the likelihood of B0095 by:
- Inspecting crash sensors after even minor front-end collisions
- Repairing damaged wiring immediately
- Keeping connectors clean and dry
- Using OEM-quality replacement sensors
- Properly securing front bumper components
- Diagnosing airbag warning lights promptly
Frequently Asked Questions
What causes B0095?
The most common causes are a failed right front impact sensor, damaged wiring, corroded connectors, collision damage, or an Airbag Control Module fault.
Is B0095 dangerous?
Yes.
A faulty frontal impact sensor may prevent the Supplemental Restraint System from deploying airbags correctly during a frontal collision.
Can a minor accident cause B0095?
Yes.
Even low-speed collisions can damage the front impact sensor or its wiring.
Can I clear B0095 myself?
Yes.
However, unless the underlying fault has been repaired, the code will usually return during the next SRS self-test.
Will B0095 affect engine performance?
No.
This code only affects the Supplemental Restraint System and has no impact on engine, transmission, steering, or braking performance.
Final Thoughts
The B0095 code indicates a fault with the Right Frontal Restraints Sensor, one of the primary crash sensors used by the Supplemental Restraint System to determine when airbags and seat belt pretensioners should deploy.
Most repairs involve replacing a damaged impact sensor, repairing wiring, cleaning corroded connectors, or correcting damage from previous front-end repairs. Because the SRS is a critical safety system, B0095 should be diagnosed and repaired as soon as possible to restore full occupant protection.
For additional airbag diagnostics and Body code repair guides, browse our complete Body (B) OBD-II Code Library:
https://my.prostreetonline.com/category/how-to/dtc-obdii
Related Articles
- Complete OBD-II Trouble Code Guide
https://my.prostreetonline.com/dtc-obdii/ - B0040 Code Explained
- B0045 Code Explained
- B0096 Code Explained