My Pro Street

B0093 Code Explained: Left Side Airbag Deployment Loop Open Circuit (Subfault)

OBD-II scanner displaying B0093 beside a driver's seat with the side airbag highlighted and a broken wiring harness beneath the seat illustrating an open-circuit deployment loop fault.

If your scan tool displays B0093, your vehicle has detected an open circuit in the Left Side Airbag deployment loop. This Body (B) diagnostic trouble code (DTC) indicates a fault within the Supplemental Restraint System (SRS) that could prevent the driver-side side-impact airbag (or left curtain airbag, depending on the vehicle) from deploying during a collision.

The Airbag Control Module (ACM) continuously monitors the electrical integrity of every airbag deployment circuit. If it detects infinite or excessively high resistance, indicating a broken electrical path, it stores B0093 and illuminates the Airbag Warning Light.

An open circuit is commonly caused by broken wiring, disconnected connectors, damaged seat harnesses, failed airbag modules, or corrosion. Since this code disables part of the SRS system, it should be repaired immediately.

If you’re researching additional SRS or Body diagnostic trouble codes, visit our Complete OBD-II Trouble Code Guide:

https://my.prostreetonline.com/dtc-obdii

Quick Facts

ItemInformation
OBD-II CodeB0093
DescriptionLeft Side Airbag Deployment Loop Open Circuit (Subfault)
CategoryBody (B) Codes
SystemSupplemental Restraint System (SRS)
Severity★★★★★ Critical
Safe to Drive?Mechanically yes, safety-wise no
Common CausesBroken wiring, disconnected connectors, damaged seat harness, faulty side airbag
Typical Repair Cost$150–1,800

What Does B0093 Mean?

The B0093 code indicates the Airbag Control Module (ACM) has detected an open circuit within the Left Side Airbag deployment loop.

Depending on the vehicle manufacturer, the circuit may include:

Each time the ignition is switched on, the ACM performs a self-test by measuring deployment loop resistance. If the resistance is infinitely high—or outside the allowable range due to a broken electrical path—the ACM determines the circuit is open and stores B0093.

If you’re troubleshooting related SRS faults, you may also find these guides helpful:

Symptoms of B0093

Common symptoms include:

Although normal driving is usually unaffected, the left-side airbag may fail to deploy during a side-impact collision.

Common Causes

Broken Seat Wiring

Repeated seat movement may eventually break wiring beneath the driver’s seat.

Common damage includes:

Disconnected SRS Connector

A connector may become unplugged after:

Corroded Connectors

Heavy corrosion can completely interrupt electrical continuity.

Damaged Side Airbag Module

An internal open circuit inside the airbag inflator may trigger B0093.

Previous Collision Damage

Improper repairs may leave:

Faulty Airbag Control Module

Although rare, the ACM itself may incorrectly detect an open deployment loop.

How Serious Is B0093?

Extremely serious.

If the Left Side Airbag deployment circuit is disabled:

Repairs should be completed immediately.

Can You Drive With B0093?

Mechanically, yes.

From a safety standpoint, no.

The vehicle will generally continue operating normally, but the left-side airbag may not deploy during a side-impact collision.

How to Diagnose B0093

1. Scan the SRS Module

Use a professional scan tool capable of accessing manufacturer-specific Body (B) codes.

Most generic OBD-II scanners cannot communicate with the Airbag Control Module.

2. Inspect Driver Seat Wiring

Inspect the wiring beneath the driver’s seat for:

3. Inspect SRS Connectors

Look for:

4. Perform Continuity Testing

Using manufacturer-approved SRS diagnostic procedures, verify wiring continuity.

Never apply battery voltage, use a powered test light, or directly probe an airbag inflator. Airbag systems contain pyrotechnic devices that can deploy unexpectedly if improper testing methods are used.

5. Inspect the Side Airbag Module

If wiring checks good, inspect the airbag module for:

Common Repairs

RepairEstimated Cost
Repair broken seat wiring$150–400
Replace SRS connector$100–250
Replace side airbag module$500–1,000
Replace seat wiring harness$250–600
Replace Airbag Control Module$900–1,800

Common Diagnostic Mistakes

One of the most common mistakes is replacing the side airbag before inspecting the seat harness.

Many B0093 repairs are ultimately caused by:

Always inspect the complete deployment circuit before replacing expensive SRS components.

Vehicles Commonly Affected

B0093 may appear on vehicles from many manufacturers, including:

Manufacturer-specific wiring diagrams and repair procedures vary by make and model.

How to Prevent B0093

Although not every failure can be prevented, you can reduce the likelihood of B0093 by:

Frequently Asked Questions

What causes B0093?

Common causes include broken seat wiring, disconnected SRS connectors, damaged wiring harnesses, faulty side airbag modules, corrosion, previous collision repairs, or a defective Airbag Control Module.

Is B0093 dangerous?

Yes.

The code disables the left-side airbag deployment circuit, reducing protection during a side-impact collision.

Can moving the driver’s seat cause B0093?

Yes.

Repeated seat movement can stretch or break wiring beneath the seat, resulting in an open circuit.

Can I clear B0093 myself?

Yes.

However, unless the underlying electrical fault has been repaired, the code will return during the next SRS self-test.

Will B0093 affect vehicle performance?

No.

The code only affects the Supplemental Restraint System and does not affect engine, transmission, steering, or braking performance.

Final Thoughts

The B0093 code indicates an open circuit in the Left Side Airbag deployment loop, most commonly caused by broken wiring beneath the driver’s seat, disconnected SRS connectors, corrosion, previous collision repairs, or an internally faulty side airbag module.

Although the vehicle will usually continue driving normally, the left-side airbag may not deploy during a side-impact collision. Prompt diagnosis using manufacturer-approved SRS procedures is essential to restore full Supplemental Restraint System protection.

For additional airbag diagnostics and Body code repair guides, browse our complete Body (B) OBD-II Code Library:

https://my.prostreetonline.com/category/how-to/dtc-obdii

Related Articles

Exit mobile version