Installing a new radio or navigation unit into your Nissan 350Z is a simple process. When you are upgrading your car audio system, our Nissan 350Z Stereo Wiring Diagram can help you save time and money. This car audio wiring guide will identify each speaker wire by color and location. Whether you are a professional car stereo installer, or a weekend mechanic saving a few dollars this car stereo wiring guide can help you.
Install kits mount to the dashboard and allows you to install your aftermarket radio. Most complete stereo kits come with an replacement dash panel, which gives you 350Z the appearance that your aftermarket stereo came from the factory.
If you are installing a car stereo or navigation system that uses a removable face or a flip up screen, it’s best to get the right mounting brackets.
The Nissan 350Z will require a flip up stereo that comes with an adjustable angle. This is because of the reclined dashboard. Most flip up faces will either run into the dash or hit the upper dash pocket.
Our guide begins with the 2003 model year for the Nissan 350Z. Take a look below for our comprehensive Nissan 350Z wiring guide.
2003 – 2005 Nissan 350Z Stereo Wiring Diagram
Radio Constant 12V+ Wire: Yellow
Radio Switched 12V+ Wire: Light Green
Radio Ground Wire: Chassis
Radio Illumination Dimmer Wire: Red/Blue
Radio Antenna Trigger Wire: Green/White
Radio Amplifier Turn On Wire: Green/Yellow
The 350Z speakers are located in the door panels, and behind the seats mounted to the rear bonnet. Wiring in an aftermarket amplifier is made easy with the rear panels, which can be removed for mounting.
Left Front Speaker Wire (-): Black/White
Right Front Speaker Wire (+): Yellow/Red
Right Front Speaker Wire (-): Red/White
Left Rear Speaker Wire (+): Light Green/Red
Left Rear Speaker Wire (-): Black/Yellow
Right Rear Speaker Wire (+): Blue/Orange
Right Rear Speaker Wire (-): Black/Pink
Some trims of the Nissan 350Z come with a subwoofer that’s mounted behind the driver side seat.
2006 – 2008 Nissan 350Z Stereo Wiring Diagram
There were some changes to the interior of the 350Z for this year range. This included changes to the stereo wiring as well. For base model 350Z vehicles, the stock stereo must be removed and a single DIN radio install kit must be used.
Radio Switched 12V+ Wire: Light Green
Radio Ground Wire: Chassis
Radio Illumination Dimmer Wire: Red/Blue
Radio Antenna Trigger Wire: Green/White
Radio Amplifier Turn On Wire: Green/Yellow
Much like the previous generation, the last model of 350Z can also be made to fit a double DIN stereo. This is a great choice for navigation systems or stereos that utilize a LED screen.
This will involve you removing the center console and shifter. If you own an automatic equipped Nissan 350Z, you will need to remove the automatic shift knob.
Left Front Speaker Wire (+): Blue/Red
Left Front Speaker Wire (-): Black/White
Right Front Speaker Wire (+): Yellow/Red
Right Front Speaker Wire (-): Red/White
Left Rear Speaker Wire (+): Light Green/Red
Left Rear Speaker Wire (-): Black/Yellow
Right Rear Speaker Wire (+): Blue/Orange
Right Rear Speaker Wire (-): Black/Pink
No matter what kind of radio or stereo you are installing however, you’ll need a dash install kit. This kit gives you the look that your aftermarket stereo came in your vehicle from the factory. When in doubt you can always test the circuits of your Nissan audio wiring guide using a digital multimeter.
Have any questions about our Nissan 350Z Stereo Wiring Diagram or wiring guides? Leave them for us below!