944 With 1JZGTE

Ka0sx · 11-13-2007, 12:37 PM

normaly i would reformat my thread from the other forum but i think ill do that later on, im just realy tired right now.... so instead...... here is a link =)
hope you guys like it.

http://www.define-touge.net/forum/showthread.php?t=955

Project Start Date: 06/19/07
Currently: Nearing completion

The beginning the stock engine was being prepped for removal took about a week to remove, the engine at a slow pace with help. I had an unfortunate mishap and couldn't actually do any work myself at the time, I was just after surgery from appendix removal.

Crap that was removed and is mostly non reusable with the new setup, will be sold off or scraped.

When the motor arrived i had to take some pics =P

Some engine dressup, because we all know that engines need to look cool right?

Lightweight Flywheel + Stage 2 Pressure plate + Ford racing disk? hooray for adaptation!

Marked on a steel plate that is going to be used as an adapter to the stock rear placed transaxel.

First test fitting of the engine into the bay

the finished adapter plate

since the mileage wasn't accurate on my car anyways i fixed the odometer and rolled it back to the new engines mileage .

then here is my altered tach with 1000 higher top and remarked on the original piece >,<

the autobell housing with the manual adapter plate whoot! its all in and mounted up!

Motor mount A

Motor Mount B

Engine finaly siting in the engine bay on its own.

stock Y pipe (SUCKS!)

and the replacment still needs to be cut .........

TrappedDarkness · 11-13-2007, 04:29 PM

a 1jz in a 944... wow.. thats a new one... man.. Chris.. i told you they'll put that engine in anything!... lol ... Hows the project coming man?

B14SER · 11-13-2007, 07:11 PM

update us!

Ka0sx · 11-14-2007, 08:47 AM

Quote:

Originally Posted by B14SER

update us!

haha chill i havn't even been able to update that thread completely.... and now I'm going to step out to finish up the brakes.

John@ProStreet · 11-14-2007, 09:12 AM

great project keep us updated

Ka0sx · 11-14-2007, 01:32 PM

Quote:

Originally Posted by John@ProStreet

great project keep us updated

hey john... you work at Prostreet right?

GSRTURBO · 11-15-2007, 09:23 AM

sick wit it man nice project!

John@ProStreet · 11-15-2007, 09:29 AM

Quote:

Originally Posted by Ka0sx

hey john... you work at Prostreet right?

been a janitor here since I can remember!

Ka0sx · 11-15-2007, 12:45 PM

Quote:

Originally Posted by John@ProStreet

been a janitor here since I can remember!

Im hoping to get my exhaust done next week probably at your guys shop, the rates i have been seeing from you guys seem better then decent.

I need a complete exhaust and my Ypipe to be cut before the collector and bolt flange to be placed there V

then for two (2.5") individual pipes to follow down past the bell housing for ground clearance then have the 3" collector re welded right under the drive shaft tube, then a flange from there all the way back to the transmission housing where another flange to the end piece with the Resonator I would provide.

any chance you can give me a price estimate?

ohh and it would be all stainless steel

John@ProStreet · 11-15-2007, 01:02 PM

Im assuming that you would supply the collector and muffler and we would get you the piping right? You are probably looking at about 200 for labor, give the shop a call and we'll try to get you in.

Ka0sx · 11-15-2007, 01:06 PM

Quote:

Originally Posted by John@ProStreet

Im assuming that you would supply the collector and muffler and we would get you the piping right? You are probably looking at about 200 for labor, give the shop a call and we'll try to get you in.

you asume correctly sir! The collector would be the same one that would be cut off from the Ypipe, Ill try and give you guys a call later on, today or tommorow, i have to leave for class at the moment.

John@ProStreet · 11-15-2007, 01:09 PM

no problem man, take it easy

Ka0sx · 11-19-2007, 04:55 PM

sorry bout not giving you guys a call but i have been busy and didn't get done what i hoped for.

but anyways

and last of all the wiring harness leading into the cabin

Ka0sx · 11-26-2007, 02:50 PM

yes i know its not idling right =)

Quik · 11-29-2007, 09:31 AM

nice work what are your plans moving forward with your project?

11-13-2007, 12:37 PM	#1
Ka0sx =) Porsche 944 My Page \| My Pics \| My Ads Join Date: Nov 2007 Location: CV, CA Posts: 33	944 With 1JZGTE normaly i would reformat my thread from the other forum but i think ill do that later on, im just realy tired right now.... so instead...... here is a link =) hope you guys like it. http://www.define-touge.net/forum/showthread.php?t=955 Project Start Date: 06/19/07 Currently: Nearing completion The beginning the stock engine was being prepped for removal took about a week to remove, the engine at a slow pace with help. I had an unfortunate mishap and couldn't actually do any work myself at the time, I was just after surgery from appendix removal. Crap that was removed and is mostly non reusable with the new setup, will be sold off or scraped. When the motor arrived i had to take some pics =P Some engine dressup, because we all know that engines need to look cool right? Lightweight Flywheel + Stage 2 Pressure plate + Ford racing disk? hooray for adaptation! Marked on a steel plate that is going to be used as an adapter to the stock rear placed transaxel. First test fitting of the engine into the bay the finished adapter plate since the mileage wasn't accurate on my car anyways i fixed the odometer and rolled it back to the new engines mileage . then here is my altered tach with 1000 higher top and remarked on the original piece >,< the autobell housing with the manual adapter plate whoot! its all in and mounted up! Motor mount A Motor Mount B Engine finaly siting in the engine bay on its own. stock Y pipe (SUCKS!) and the replacment still needs to be cut ......... Last edited by Ka0sx : 11-14-2007 at 02:42 PM. Reason: [img]

11-13-2007, 04:29 PM	#2
TrappedDarkness Pro Street Racer 81 Chevy C10 My Page \| My Pics \| My Ads Join Date: Mar 2007 Location: Hermitage, Tn Posts: 934	Re: 944 With 1JZGTE a 1jz in a 944... wow.. thats a new one... man.. Chris.. i told you they'll put that engine in anything!... lol ... Hows the project coming man? __________________

11-13-2007, 07:11 PM	#3
B14SER owner of Burgess Customs 96' B14 SER (sentra) My Page \| My Pics \| My Ads Join Date: Jul 2007 Location: Roanoke , Virginia Posts: 544	Re: 944 With 1JZGTE update us! __________________ Live Free, Live Fast, OR Don't Live At All !

11-14-2007, 09:12 AM	#5
John@ProStreet Super Moderator 2008 Corvette Z06 My Page \| My Pics \| My Ads Join Date: Oct 2006 Location: FIT Posts: 456	Re: 944 With 1JZGTE great project keep us updated __________________ Pro Street Motorsports www.prostreetonline.com Pro Street Motorsports 2007 Synthetic Oil Shootout Ride of the Month!! WIN 100 DOLLARS!!

11-15-2007, 09:23 AM	#7
GSRTURBO Im bringing sexay back 1992 Honda Civic - Turbo B18c1 My Page \| My Pics \| My Ads Join Date: Oct 2006 Posts: 1,467	Re: 944 With 1JZGTE sick wit it man nice project! __________________ -Brandon DD '92 Civic VX - B18C1 swap - 8spi t04r

11-15-2007, 01:02 PM	#10
John@ProStreet Super Moderator 2008 Corvette Z06 My Page \| My Pics \| My Ads Join Date: Oct 2006 Location: FIT Posts: 456	Re: 944 With 1JZGTE Im assuming that you would supply the collector and muffler and we would get you the piping right? You are probably looking at about 200 for labor, give the shop a call and we'll try to get you in. __________________ Pro Street Motorsports www.prostreetonline.com Pro Street Motorsports 2007 Synthetic Oil Shootout Ride of the Month!! WIN 100 DOLLARS!!

11-15-2007, 01:09 PM	#12
John@ProStreet Super Moderator 2008 Corvette Z06 My Page \| My Pics \| My Ads Join Date: Oct 2006 Location: FIT Posts: 456	Re: 944 With 1JZGTE no problem man, take it easy __________________ Pro Street Motorsports www.prostreetonline.com Pro Street Motorsports 2007 Synthetic Oil Shootout Ride of the Month!! WIN 100 DOLLARS!!

11-19-2007, 04:55 PM	#13
Ka0sx =) Porsche 944 My Page \| My Pics \| My Ads Join Date: Nov 2007 Location: CV, CA Posts: 33	Re: 944 With 1JZGTE sorry bout not giving you guys a call but i have been busy and didn't get done what i hoped for. but anyways and last of all the wiring harness leading into the cabin

11-26-2007, 02:50 PM	#14
Ka0sx =) Porsche 944 My Page \| My Pics \| My Ads Join Date: Nov 2007 Location: CV, CA Posts: 33	Re: 944 With 1JZGTE yes i know its not idling right =)

11-29-2007, 09:31 AM	#15
Quik Super Moderator 97 Anniversary MKIV My Page \| My Pics \| My Ads Join Date: Oct 2006 Location: Northern California Posts: 289	Re: 944 With 1JZGTE nice work what are your plans moving forward with your project? __________________ sometimes i ban slow, sometimes i ban Quik

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Pro Street Motorsports	My Pro Street Community
Pro Street Online Store Pro Street Motorsports Shop OEM Replacement Parts Check your order status Contact us (Hayward, CA)	Register for our free community! Member Photo Gallery Do It Yourself & Tech Tips Product Reviews Newest Rides to Pro Street