90blkteg

I'm new to the hondas and not knowing any better I bought a fpr off of ebay and I need help with the install. It's bigger than a b&m fpr wiht the gauge built into it already. Please help?

ButcherRacing

Off Ebay ouch. Well we will try to help what brand is it

__________________
If it wasn't for my horse, I would never have spent that year in college.

90blkteg

It's made by cosmo racing it is big the gauge is already built into it go to type in FPR for integra and you will see it. It will be the biggest on on there. Thanks!

90blkteg

Oh yeah check ebay for the pic it's the blackk one

deep_stage_srt4

i went here: http://www.cosmoracing.com/productin...id=223&pid=943

and i found this: "Beware - Recently a lot of overseas manufacturers have been flooding the market with sub-standard regulators that look a lot like COSMORacing¡¦s. But that¡¦s where the similarity ends. More importantly, these weak, imprecise and unreliable knock-off regulators can potentially cause serious damage from engine running too lean. Protect yourself and confirm that you are buying a genuine COSMORacing Precision Sport Regulator. The money you saved on the cheap knock-off will be short-lived when you¡¦re replacing your engine."

i was looking at your FPR and it said that at the bottom of the page. might want to check you listing and call cosmo, make sure you got the real deal before you put it on there. we have all been burned on ebay once or twice, just trying to keep you from some headache.

__________________
There is no replacement for displacement, like a turbo! -dssrt4

**Sponsored By **

GSRTURBO

Exactly the reason why you should never performance parts from EBAY

__________________
-Brandon
DD '92 Civic VX - B18C1 swap - 8spi t04r

Quik

take a pic of that FPR and I can assist you with installation.

__________________

sometimes i ban slow, sometimes i ban Quik

deep_stage_srt4

wait!!!! first i insist that you call the company and insure its a legitimate part. i dont want to see you fry your piston rings when you starve your car out with sub-standard parts.

__________________
There is no replacement for displacement, like a turbo! -dssrt4

**Sponsored By **

SOB

ebay = bad mmmmmkay??

__________________
my signature

90blkteg

Thanks guys I think that I will just opt out for a B&M FPR to cut the B. S.
I don't want to mess up my project I'm already spending too much money on this and I'll be damned if a little part like that is going to kill something that I put alot of time and money into

deep_stage_srt4

did you make the call?

__________________
There is no replacement for displacement, like a turbo! -dssrt4

**Sponsored By **

GSRTURBO

werd..... good call

__________________
-Brandon
DD '92 Civic VX - B18C1 swap - 8spi t04r

ButcherRacing

so is it legit?

__________________
If it wasn't for my horse, I would never have spent that year in college.

90blkteg

Yeah this weekend I'm going to order a pair of 92 smoked bumper lights (because I am tired of the clear crap) an the B&M FPR. Iknow this is off the subject but can a h22 fuel pump be used in an integra without side affects ?

Quik

An H series pump will require modification to make work right on your car. I would opt for the 190 walbros, you can find them for 80 bux shipped at some places

__________________

sometimes i ban slow, sometimes i ban Quik