deep_stage_srt4

hell you know Pro street has serial numbered Benen Ind tow hooks on sale right now. i picked one up and they look great.

__________________
There is no replacement for displacement, like a turbo! -dssrt4

**Sponsored By **

john25rs

/\ Any pictures of it?

deep_stage_srt4

check out my "give me the booty" thread, theres a pic in there. also john from PS started a thread about them with more pictures of different styles

__________________
There is no replacement for displacement, like a turbo! -dssrt4

**Sponsored By **

john25rs

nice piece, I had already picked one up though.
Just got my Kartboy Front swaybar endlinks, and ordered the PWR WRX radiator. Picking up the side skirts in the morning, going to have them painted over the weekend. Just got word the JDM rear Brembos should be powdercoated Red this weekend, then on the way to me shortly there after. Still waiting on word about the CF front lip. Should be ready to Race @ PIR in April.

john25rs

Sparco harness pads should be in this week, along with the PWR radiator, Just need to work out what I want to do for a radiator fan, and possibly a new coolant overflow container. Installed the side skirts today.

It's already dark, but I just went out and took a few pictures, sorry for the poor quality, I'll get some more soon!
:bigthumpup:

john25rs

Here's a quick clip Justin took on his phone, we were in a spot of traffic, so I couldn't really open it up for more than a second or two. We were cruising at about 75, and I dropped it into 5th.





And here's one of me and Pat's ver. 6 swap at a light. I'll give a break down of what happened, since as you can see, we didn't leave on the green.
We both pulled up, and I said,
"We have to take the next right, follow me."
(pat)"I'll let you in front of me"
"Ha! There's no reason to, 'Let' me in front of you, you have no choice! (joking, being an ass)".........

[Light turns Green]......

And we're still talking trash!

After the truck on the left took off, We realized it was green and took off, But I kinda bogged it off the line, got off the clutch a little too early.





I'm gonna try and get a full on, Launch-controlled video clip soon, Trying to get someone to do the video while I drive.

john25rs

CF S201 hood scoop should be here Wed. I'll post pictures after I install it.

john25rs

Last pictures before the CF S201 hood scoop goes on tomorrow.

deep_stage_srt4

lookin good, how long has the project taken you so far?

__________________
There is no replacement for displacement, like a turbo! -dssrt4

**Sponsored By **

john25rs

I started with the rolling chassis on Feb. 14th, 2007, So about a year. Most of the time has been waiting for parts and I wasted a lot of time (at least a month or two) waiting for the rollcage to be completed.

deep_stage_srt4

not bad, i'm just doing engine work and its take about 3 months. i wanted to be up and running by the 29th but i just had my cams sent out. so maybe early april

__________________
There is no replacement for displacement, like a turbo! -dssrt4

**Sponsored By **

john25rs

Yeah, engine work always take a while, machine shops can take some time do get things done. here's a few shots with the new scoop.

john25rs

here's a clip of the dyno



244 WHP @ 10 psi, 91 oct. (No AVCS, WG boost)

I just wanted to make sure the A/F ratio was safe before the Track day on Saturday. It was nice and safe, running a little rich, leanest it got was 12:1 and it was only pushing 8 PSI there, so it's good to go! Going to pull the Dash and figure out the AVCS in the next few weeks.

john25rs

Got it out on the Track, Performed great, can't wait to get some sticky tires and track wheels!

john25rs

Here's some new pictures with the CF lip installed