beak

Assuming you will be using the same vintage drivetrain as the car here are the Honda part numbers for the 3 main mounts you will require.

All mounts from 99-00 Honda Civic SiR (US Si)
Note: The transmission mounts are for the 99-00 SiR tranny. If someone could confirm that they would also fit the Integra transmissions it would make this thread more usefull! the T-Belt mount will fit any B Series engine however.)

Timing Belt Mount
Part # 11910-P30-000
(Mount bolts to the block underneath the timimg belt cover)

Transmission Mount (top) **Update: All hydraulic trans use the same mount, therefore this mount is not required**
Part # 50825-S04-000

Rear Mount (t-shaped bracket)
Part # 50827-S04-N10

Torque Mounts left/right
I don't have these part numbers. If anyone can contribute it would be appreciated.
The transmission torque mount required will be for any Integra 94-up and Civic Si (Canadian SiR) 99-00. The A/C torque mount will be specific to the engine you have.

__________________
Don't fry bacon when you're naked.

96 EK Hatch 343whp, and 245ft/lb torque at 11psi - Stock GSR Motor