slow2000z28

this is rated r racing's new project. a 87 camaro berlinetta 2.8l v6. were dropping the 2.8 and installing a crate 350 from gm performance. weve got a rebuilt 700r4 trans, w/ a shift kit. the owners only got 900 in the whole project. he won the crate engine at the powerblock tour here ivn va. bought he car for 675. w/ the rebuilt trans. installed a shift kit and bought some z28 wheels for it w/ a 3.42 rear from my stock setup. were going for a budget build w/ this and hope to spend no more than 1500 total. not bad for a 305hp 330ftlbs camaro.

__________________
QTP LT's, QTP ORY w/ Cut outs, ported tb, ported Maf, msd wires, 4.10 gears, upgraded axles and drive shaft, built Rockland T-56 trans, t/a rear girdle, centerforce clutch, cold air intake, flowmaster, and standalone computer tunning from HPTuners
weiand intake on the way and sts turbo kit hopefully by this spring.

beak

*squint*

Show some bigger pics

Not bad... keep us updated, I've always been interested in the older f bodies... that gen is one that no one really talks about much

__________________
Don't fry bacon when you're naked.

96 EK Hatch 343whp, and 245ft/lb torque at 11psi - Stock GSR Motor

slow2000z28

i would but this is the only way i can load pics for now.... i posted the problem in a thread

__________________
QTP LT's, QTP ORY w/ Cut outs, ported tb, ported Maf, msd wires, 4.10 gears, upgraded axles and drive shaft, built Rockland T-56 trans, t/a rear girdle, centerforce clutch, cold air intake, flowmaster, and standalone computer tunning from HPTuners
weiand intake on the way and sts turbo kit hopefully by this spring.

slow2000z28

here try this one
russ1.jpg

__________________
QTP LT's, QTP ORY w/ Cut outs, ported tb, ported Maf, msd wires, 4.10 gears, upgraded axles and drive shaft, built Rockland T-56 trans, t/a rear girdle, centerforce clutch, cold air intake, flowmaster, and standalone computer tunning from HPTuners
weiand intake on the way and sts turbo kit hopefully by this spring.